| Once the body was bead blasted you could see the big picture. Needless to say there was a lot more metal work to be done than expected. Lots of poor old patching and the obvious rust! So far we have replaced the rear seat floor pans, left cowl, shifter hump and currently replacing the trunk pan and left and right quarter panels. More pictures to come and a list of all metal work to be performed. All sheet metal work was performed by Justin Newpower a
Jaguar, Range Rover and now Chevelle Specialist in Phoenix Arizona. If you have a project out here in Az use the contact link to get in touch with Justin. |
Click on image for larger view
|
| |
|
|
|
Rear seat floor pan |
Rusty floor
|
Rear seat pan after
|
Shifter hump
|
Shifter hump with holes
|
Hump after repair
|
Left side cowl
|
Install
|
Cowl installed finished
with seam sealer
|
Trunk pan
|
Install
|
|
Right rear corner
|
Left rear corner
|
Firewall prior to
smoothing out |
Left Quarter Panel
cut out |
|
After applying Rust-Mort
to rusted areas |
Patching it back together
|
|
Right Quarter Panel
cut out |
Before coating
|
With undercoat
sprayed on
|
With undercoat
sprayed on
|
